 |
 |
|
Attention! You have reached our old site at TurntableBelts.com Please click above to use our new site, TurntableNeedles.com |
| ||
|
Past Customers:
We are sure you will love our new
website, but if you prefer, you may still scroll down to use our old website. We
have all research areas completely intact for our past customers who may prefer to use
the navigation style with which they are familiar. New visitors may
find the simple listing of part numbers on our old site valuable until
we get all these lists transferred to the new site.
if
your brand/model not yet listed.
SECURE 
FORMContains
Pricing info
300+ COLOR
If your turntable model is NOT listed:
If you still have the old belt
intact:
> Lay it out
flat on the table
> Pinch it at
both ends & straighten the belt but don't stretch it.
> Measure the
length & then double it and choose or we will recommend
a size about 3-5% smaller.
Old belt too far gone to measure:
> Just use a piece of string and
thread it temporarily in place of where the belt goes.
> Then measure the length of the
string and Email
us the exact length (inches). Along with your EXACT model number.
If your belt has a
round or square cross section, please give us the thickness as well.
We can assist
you in choosing a
belt usually 3-5% smaller than the length you measured. EXAMPLE:
You measure
25" on your turntable
with a string.....we will recommend a 23.6" belt, NOT a 25" belt as there
must
be some tension for
your belt to work.
Email us if you have a tape deck, reel to reel, VCR, answering machine,
etc.
Most DAYTRON models NOT listed use Belt Part#
'Flat Belt Large' Width=.250"(¼")
(6.35mm)
FBL 35.1
'Flat Belt Large' Width=.250"(¼") (6.35mm) FBL 35.1"(89.2cm)
| SX-1000 |
© 2001, AVCR Electronics, Corvallis, OR, USA Privacy Policy Refund Policy